THORLABS DCU22 Series Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging340
DCx Camera Functional Description and SDK Manual
IS_CCOR_ENABLE_HQ_ENHANCED
When used for monochrome cameras, the system
returns 0.
When used together with
IS_GET_DEFAULT_CCOR_MODE
When used for color cameras and together with
IS_GET_DEFAULT_CCOR_MODE, this parameter
returns the default color correction mode:
IS_CCOR_ENABLE_NORMAL
IS_CCOR_ENABLE_HQ_ENHANCED
When used for monochrome cameras, the system
returns 0.
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no
driver has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera failed
(no camera connected or initialization error).
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MODE
Camera is in standby mode, function not allowed
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or is
not available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
IS_NO_IR_FILTER
No IR filter available
IS_NO_SUCCESS
General error message
IS_NOT_SUPPORTED
The camera model used here does not support
this function or setting.
IS_SUCCESS
Function executed successfully
Related functions
is_SetColorConverter()
is_SetColorMode()
is_SetAutoParameter()

THORLABS DCU22 Series Specifications

General

Brand	THORLABS
Model	DCU22 Series
Category	Security Camera
Language	English