© 2016 Thorlabs Scientific Imaging342
DCx Camera Functional Description and SDK Manual
RGB24 (8 8 8), for monochrome and color cameras, LUT/gamma
active
RGB48 (12 12 12), for monochrome and color cameras, LUT/
gamma active
RGB32 (8 8 8), for monochrome and color cameras, LUT/gamma
active
RGBY (8 8 8 8), for monochrome and color cameras, LUT/gamma
active
BGR36 (12 12 12), for monochrome and color cameras, LUT/
gamma active
BGR30 (10 10 10), for monochrome and color cameras, LUT/
gamma active
BGR24 (8 8 8), for monochrome and color cameras, LUT/gamma
active
BGR48 (12 12 12), for monochrome and color cameras, LUT/
gamma active
BGR32 (8 8 8), for monochrome and color cameras, LUT/gamma
active
BGRY (8 8 8), for monochrome and color cameras, LUT/gamma
active
Planar RGB (8) for monochrome and color cameras, LUT/gamma
active
BGR16 (5 6 5), for monochrome and color cameras, LUT/gamma
active
BGR15 (5 5 5), for monochrome and color cameras, LUT/gamma
active
YUV 4:2:2 (8 8), for monochrome and color cameras, LUT/gamma
active
YC
b
C
r
4:2:2 (8 8), for monochrome and color cameras, LUT/gamma
active
Returns the current setting.
Return values
When used together with
IS_GET_COLOR_MODE
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
A capturing operation is in progress and must
be terminated before you can start another one.
The camera type defined in the .ini file does not
match the current camera model.
To Next Page
Loading...
Need help?
General
