THORLABS DCU223 SERIES Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
343
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MODE
Camera is in standby mode, function not allowed
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
IS_NO_IR_FILTER
No IR filter available
IS_NO_SUCCESS
General error message
IS_NOT_CALIBRATED
The camera does not contain any calibration
data.
IS_NOT_SUPPORTED
The camera model used here does not support
this function or setting.
IS_NULL_POINTER
Invalid array
IS_OUT_OF_MEMORY
No memory could be allocated.
IS_SUCCESS
Function executed successfully
IS_TIMED_OUT
A timeout occurred. An image capturing process
could not be terminated within the allowable
period.
Related functions
is_SetDisplayMode()
is_SetColorConverter()
is_SetColorCorrection()
is_GetColorDepth()
is_AllocImageMem()
is_RenderBitmap()
Note on obsolete parameters
The following parameters for color formats are obsolete. Only the new parameters should be used:
Old parameter
New parameter
IS_SET_CM_RGB32
IS_CM_BGRA8_PACKED
IS_SET_CM_RGB24
IS_CM_BGR8_PACKED
IS_SET_CM_RGB16
IS_CM_BGR565_PACKED
IS_SET_CM_RGB15
IS_CM_BGR555_PACKED
IS_SET_CM_Y8
IS_CM_MONO8
IS_SET_CM_BAYER
IS_CM_BAYER_RG8
IS_SET_CM_UYVY
IS_CM_UYVY_PACKED
IS_SET_CM_UYVY_MONO
IS_CM_UYVY_MONO_PACKED
IS_SET_CM_UYVY_BAYER
IS_CM_UYVY_BAYER_PACKED
IS_SET_CM_CBYCRY
IS_CM_CBYCRY_PACKED
IS_SET_CM_RGBY
IS_CM_BGRY8_PACKED
IS_SET_CM_RGB30
IS_CM_BGR10V2_PACKED

THORLABS DCU223 SERIES Specifications

General

Brand	THORLABS
Model	DCU223 SERIES
Category	Security Camera
Language	English