Thunder Laser Nova - Page 13

www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel : (86)769 826653 Dongguan City, Guangdong Province, China
12
Add lubricant oil (or Rust Preventative Grease) to all rails on X&Y axis.
Add lubricant oil (or Rust Preventative Grease) to four Z axis screws
 Laser path
1. Mirror alignment;
When the laser head move to four corners of the working table, check if the laser beam lasers to
the same position on the third reflective mirror.
2. Vertical alignment;