www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel : (86)769 826653 Dongguan City, Guangdong Province, China
3.12 Engraving problem—how to Improve Engraving Quality in
the scan mode of X-swing
The engraving quality working on x-swing is generally worse than x-unilateralism, it usually
results in ghosting effect or image offset or bi-directional engraving offset, like below.
In RDworks, you can adjust the Reverse Interval to improve this issue.
To Next Page
Loading...
