Thunder Laser Nova - Communication Error; Ethernet Cable Connection

www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel : (86)769 826653 Dongguan City, Guangdong Province, China
56
3.3 Communication Error
3.3.1 Ethernet cable connection
Connect the laser cutter system to desktop or laptop via an Ethernet cable.
1. Configure computer
Go to Start>>Control Panel>>Network and Sharing Center, configure the connection for local
connection, like below.