www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel : (86)769 826653 Dongguan City, Guangdong Province, China
3.5 How to run several laser machines with one PC via USB
cable connection
If there are several USB interfaces with your PC, it’s able for one PC (laser software) to connect
with several machines.
pc to hub , one port of the hub goes to laser
But pc will does only communicate with one machine and sending the file into the laser in the
same time
For USB connection as below
1. When connecting with the first machine, it’s connected automatically as default.
2. When connecting with the second machine, please click the “Add” below, then click “USB” and
choose COM3 (or other ports).
To Next Page
Loading...
