Thunder Laser Nova - How to Adjust and Replace the Motor

www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel : (86)769 826653 Dongguan City, Guangdong Province, China
91
4.3 How to adjust and replace the motor?
Firstly, disconnect the machine from its power source.
① X-axis Motor
Screw A: There are four screws A, for fixing the X motor;
Screw B: It’s for adjusting the belt tension, please loosen the four screws A before adjust belt.