www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel : (86)769 826653 Dongguan City, Guangdong Province, China
Then press the red button to test, check if electric current (on screen or ammeter) changing and
laser tube has laser beam comes out according to the video below.
https://www.youtube.com/watch?v=ly9mJi1bXSg
If both electric current and laser tube are nothing, please check if the laser power supply is
showing sign of energy output — making “zizi” sound.
If yes, the laser tube should be worn out, otherwise, laser power supply fails.
Laser path or machine parameters issue
If both electric current and laser tube are working, please put back the plug of control signal.
Then restore your machine to factory setting, try that first to eliminate machine parameters issue,
like below.
Operate the LCD panel;
Z/U button>>“set default para”>> Password:HF8888.
In the end, press reset button.
If the laser beam won’t come out form the laser head, please align the mirror according to the
video below.
http://www.thunderlaser.com/how-to-use-your-laser-machine/how-to-adjust-the-laser-beam-pa
th.html
End
To Next Page
Loading...
