www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel : (86)769 826653 Dongguan City, Guangdong Province, China
If the gear loose that mean the transmission shaft module is bad please contact with us.
Besides,there are another ways to improve the cutting problem by adjusting software.
1. An option of software for optimizing that problem.
Like below:
Then re-download the file to laser machine and test again.
If still not good,please go to next step.
2.Reduce the User setting of Go Acc factor and Speed factor to minimize the impact Like below:
To Next Page
Loading...
