www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel : (86)769 826653 Dongguan City, Guangdong Province, China
Solution：
Please convert the image into a 1-bit Windows bitmap (BMP) image where you will only have
black and white pixels available to you. In RDworks, you can use “Bitmap handle” tool, like below.
Resolution (pixels/inch): 1500;
Frequency: 60~80;
Note: Images for laser engraving should generally have a resolution of at least 300dpi as the
output size. In RDwroks, you can check it from the BMP window, like below.
To Next Page
Loading...
