www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel : (86)769 826653 Dongguan City, Guangdong Province, China
After that, click OK to exit all windows.
3. Configure laser cutter machine
Go to LCD Panel>>Z/U Button>>IP config+.
Default machine IP: 192.168.1.100, and you should set the Gateway same with router IP.
Our router IP is 192.168.1.1, so set gateway as 192.168.1.1, like below:
4. Configure laser cutter software
Add and select the Web port on rdworks, like below.
To Next Page
Loading...
