www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel : (86)769 826653 Dongguan City, Guangdong Province, China
Note: the laser head will find home(top left corner) during boot up, if the controller board have
not been set as factory setting, the laser head will homing to other corner then cause the
accident. So check the setting of the board before putting back the connector of Axis x and y.
2. Turn on the machine to provide power to the board, click ECS button to stop the resetting,
then connect the computer and machine.
3. In software, please check the setting in vendor settings windows.
Open the vendor setting windows: menu bar(top left corner)>>File(F)>>vendor
setting>>password:rd8888.
To Next Page
Loading...
