TKS Operator's manual
14
1.4.4
Lifting the machine
with a crane
Only use approved lifting equipment.
The weight of the machine is listed in the
section “Technical Data”. For location of lifting
point see Fig. 7
Caution!
Ensure that no-one is under or close to the
machine when it is being lifted.
Lift the machine using a strap attached to the
main frame of the machine, so that the lift is
balanced.
Check that the straps are properly fi xed before
starting the lift.
Use an extra strap to help keep the machine in
position
1.4.5
New machine caution
Read the operator’s manual
Be particularly careful when starting a new
machine for the fi rst time. Installation faults,
incorrect operation, etc. may lead to expensive
repairs and loss of earnings. The TKS product
guarantee does not cover damage resulting
from failure to follow the recommendations
contained in the instruction manual.
Please pay particular attention to this symbol.
It is used to highlight important information, to
help prevent incorrect installation and
operation.
Pay particular attention to the following
when commissioning a new machine:
Check that the machine is correctly installed
and that it is not damaged.
Lubricate the machine where shown in
chapter 5 Maintenance
Remember that the operator has a
responsibility to ensure that your product is
properly and securely installed.