TKS K2 - Command Feeding Grain 1 and Feeding Grain 2

TKS Operator's manual
28
3.3.4.3 Command "Feeding grain 1" and "Feeding grain 2"
This command is used when feeding grain.
• If the grain delivery is located right under the forage, then it is fed out at the same time.
• Feeding grain 1(2)
Feeding grain 1(2): Select to feed out to a defi ned group or to a fi xed point.
• Feeding grain 1(2) -> Group:
Enter group number. Det vises også navn for skrevet gruppe nummer.
• Feeding grain 1(2) -> Group -> Grain weight:
Enter the quantity of grain for feeding in kg.
• Feeding grain 1(2) -> Point: *
Enter point position or ( ) for current machine position.
Choose the feeding side, left or right (if the machine is not equipped with a side feed then this is
not necessary)
Feeding grain 1(2) -> Point -> Grain weight: Enter the quantity of grain for feeding in kg.