Toa EV-700 - Confirming Audio Source Contents

58
ON
OFF
14.4. Confirming Audio Source Contents
When performing recording (See p. 52.), playback (See p. 55.), or deletion (See p. 59.) of the audio
source for emergency playback, you can conrm the audio source contents.
Step 1. Press the Monitor key while the playback mode, recording mode, or deletion mode
for the emergency playback is being selected.
The Monitor indicator lights, and monitor playback of Emergency playback will start
and the playback is output only to the headphones.
Tip
Monitor sound is not output from the Line output terminals 1 and 2.
Step 2. To nish monitoring partway, press the Monitor key again.
The monitor indicator goes off and monitor playback is terminated.
Tip
When the audio source for Emergency playback is played to the end, the monitor
indicator automatically goes off and monitoring terminates.