Topcon KR-1 - MONITOR SCREEN; MEASUREMENT SCREEN; SETTINGS SCREEN; CORNEA DIAMETER MEASUREMENT SCREEN

14
COMPONENTS
MONITOR SCREEN
MEASUREMENT SCREEN
SETTINGS SCREEN
CORNEA DIAMETER MEASUREMENT SCREEN
Operator ID
Refractive power
measurement result (L)
Corneal curvature radius
measurement result (L)
Number of reading/setting
(L, REF)
Number of reading/setting
(L, KRT)
VD (Vertex distance)
Typical value of L measurementTypical value of R measurement
Patient No. (Patient ID
when patient ID is input)
Outer alignment mark
Alignment mark
Refractive power
measurement result (R)
Corneal curvature radius
measurement result (R)
Number of reading/setting
(R, REF)
Number of reading/setting
(R, KRT)
Device ID number
D/mm unit display
Peripheral KRT value (L)
Peripheral KRT value (R)
*Eye Height mark: Shows the position of the eye height mark on the chinrest.
*Eye Height mark
1/5
Initial
AUTO
ON
OFF
ON
ON
ON
OFF
OFF
ON
1
Buzzer
Start mode
Auto Print
Printer
Patient No. reset
Show patient ID
Required patient ID
Device ID number
Print
Comm
LAN
Operator ID
Special
Return
R L
R:0.00R: 0.0 0 L:9.50L: 9.5 0