Topcon KR-1 - PRINTOUT FORMAT SETTING

17
COMPONENTS
PRINTOUT FORMAT SETTING
Printout format can be changed by pushing "Print" in the Settings screen. For Print settings,
see "SETTING FUNCTIONS ON SETUP SCREEN" on page 44.
PRESET
All: Initial setting (all measurement values are printed.)
Ave: Only typical value are printed.
Classic: Equivalent with RM/KR-8900 Classic 2
ITEM INITIAL
PRESET
All Ave Classic
Common
Barcode OFF OFF OFF OFF
Operator ID OFF OFF OFF OFF
Name ON ON ON ON
Date ON ON ON ON
Date style YMD YMD YMD YMD
Patient ID ON ON ON ON
Device ID number OFF OFF OFF OFF
Serial number ON ON ON ON
Include error data OFF OFF OFF OFF
TOPCON logo ON ON ON ON
Message OFF OFF OFF OFF
Message data NULL NULL NULL NULL
Between the lines 0 0 0 0
Auto Cut ON ON ON ON
REF/KRT
Print order DATA DATA DATA DATA
VD ON ON ON ON
Cylinder sign ON ON ON ON
REF format ALL ALL AVE ALL
Credibility OFF OFF OFF OFF
S.E. ON ON ON ON
PD ON ON ON ON
ADD OFF OFF OFF OFF
KRT print order D/mm D/mm D/mm D/mm
KRT format ALL ALL AVE AVE
KRT style R1R2 R1R2 R1R2 HV
KRT print format R1R2 R1R2 R1R2 HV
KRT average ON ON ON ON
KRT cylinder ON ON ON ON
Cornea diameter ON ON ON ON
REF
VD ON ON ON ON
Cylinder sign ALL ALL AVE ALL
REF format OFF OFF OFF OFF
Credibility ON ON ON ON
S.E. ON ON ON ON
PD OFF OFF OFF OFF
ADD OFF OFF OFF OFF
KRT
KRT print order D/mm D/mm D/mm D/mm
KRT format ALL ALL AVE ALL
KRT style R1R2 R1R2 R1R2 HV
KRT print format R1R2 R1R2 R1R2 HV
KRT average ON ON ON ON
KRT cylinder ON ON ON ON
Cornea diameter ON ON ON ON