Toro Reelmaster 5510-D - Page 522

RemovingtheFrontLiftArms
1.Parkthemachineonalevelsurface,lowerthecuttingunits,shutoffthe
engine,settheparkingbrake,andremovethekeyfromthekeyswitch.
2.Removethecuttingunitfromthefrontliftarmtoberemoved.
g215434
Figure313
1.#4liftarm4.Thrustwasher(2each)
2.Liftcylinder5.Cylinderslidepin
3.Retainingring(2each)
3.Disconnecttheliftcylinderfromtheliftarm(item1inFigure313)asfollows:
A.Remove1retainingringandthrustwasherfromthecylinderpinthat
securestheliftcylindertotheliftarm.
B.Pullthecylinderpinfromtheliftcylinderandliftarm.Locateandretrieve
thesecondthrustwasher.
C.Pivottheliftcylinderrodendawayfromtheliftarm.
4.Removethelynchpin(item16Figure312)andslidethepivotyokeassembly
fromtheliftarm.Locateandretrieve2thrustwashers.
5.Removethefastenersthatsecurethebridgeplate(item5or17Figure312)
tothemachine.
6.Slidethefrontliftarmfromtheliftarmpivotshaft(item3inFigure312).
g215435
Figure314
1.#5liftarm2.Liftarmbushing(2each)3.Pivotyokebushing(2
each)
Chassis:ServiceandRepairs
Page8–34
Reelmaster
®
5410/5510/5610Series
15216SLRevC