Toro Reelmaster 5510-D - Page 60

InstallingtheEngine(continued)
g229068
Figure24
1.Fuelreturnhose2.Fuelsupplyhose
3.Fuel/waterlter
A.Connectfuelsupplyandfuelreturnhosestoenginettings(Figure24).
EnsurethatreturnhoseisroutedthroughR-clamponbracketattachedto
ywheelplate.Securehoseswithhoseclamps.
B.Connectupperandlowerradiatorhosestotheengine.Securehoses
withhoseclamps.
8.Connectthrottlecabletoinjectorpump(Figure22):
A.Routethrottlecabletoinjectorpumponengine.
B.Installthethrottlecableendintotheswivelinspeedcontrollever.Secure
cableendwithbolt.
C.Positionthrottlecableundercableclamp.
D.Attachcableclampsthatsecurethrottlecabletoengineanddriveshaft
brackets.Asclampsaretightened,ensurethatthecableisnotbent
whichcouldcausecablebinding.
E.Adjustthrottlecontrol;refertoAdjustingtheThrottleControl(page3–6).
9.Installaircleanerassembly;refertoAirCleanerAssembly(page3–8).
10.Installexhaustsystemtomachine;refertoExhaustSystem(page3–11).
11.Fillradiatorwithcoolant.
12.Checkenginehydraulic-uidlevelandadjustifnecessary.
13.Closehoodandconnectpositive(+)andthennegative(-)batterycablesto
thebattery.
14.Bleedfuelsystem.
15.Startengine.Checkforuidleaksandproperengineoperation.
16.Afterrunningengineforashorttime,stopengineandensureradiatoris
full.Addcoolantifnecessary.
17.Securehoodbeforereturningmachinetooperation.
KubotaDieselEngine:ServiceandRepairs
Page3–26
Reelmaster
®
5410/5510/5610Series
15216SLRevC