Toro Sentinel - Decoder Management; BL Decoder Address Assignment; Prog Toro AC Decoder Setup

40
V. Option Menu
Radio Test Relay Code
The radio test relay code is the unit code of a satellite that will be used when executing the UHF radio test.
The radio test relay should be executed with a known good satellite within radio range of the satellite under test.
Port 0/Bk Function
Enables the port to be used for a specic function such as CTM, Long Range Wireless, Toro DC 2-wire, AC 2-Wire, etc.
Option
Option
OPTION
Radio Test Relay Code
Radio Test Relay Code
CODE = 001
** SAVED! **
CODE = 001
OPTION
Port 0/Bk Function
Port 0/Bk Function
TORO 2-Wire
** SAVED! **
TORO 2-Wire
1 2 3 4
1 2 3 4
ENTER
- OR -
ENTER
- OR -
ENTER
- OR -
ENTER
- OR -