Toro Workman 07390 - After Operation Safety

TroubleshootingtheHydraulic
Control
•Difcultyinconnectingordisconnectingquick
couplers.
Thepressureisnotrelieved(thequickcoupleris
underpressure).
•Thepowersteeringisturningwithgreat
difcultyoritisnotturningatall.
–Thehydraulic-uidlevelislow.
–Thehydraulic-uidtemperatureistoohot.
–Thepumpisnotoperating.
•Therearehydraulicleaks.
–Thettingsareloose.
–ThettingismissingtheO-ring.
•Anattachmentdoesnotfunction.
–Thequickcouplersarenotfullyengaged.
–Thequickcouplersareinterchanged.
•Thereisasquealingnoise.
–RemovethevalveleftintheONpositiondetent,
causinghydraulicuidtoowovertherelief
valve.
–Thebeltisloose.
•Theenginedoesnotstart.
ThehydraulicleverislockedintheFORWARD
position.
AfterOperation
AfterOperationSafety
GeneralSafety
•Beforeyouleavetheoperatingposition,dothe
following:
–Parkthemachineonalevelsurface.
–ShiftthetransmissiontotheNEUTRALposition.
–Engagetheparkingbrake.
–Lowerthecargobed.
–Shutoffthemachineandremovethekey(if
equipped).
–Waitforallmovementtostop
•Allowthemachinetocoolbeforeadjusting,
servicing,cleaning,orstoringit.
•Donotstorethemachinewherethereisanopen
ame,spark,orpilotlight,suchasonawater
heaterorotherappliance.
•Keepallpartsofthemachineingoodworking
conditionandallhardwaretightened.
•Maintainandcleantheseatbelt(s)asnecessary.
•Replaceallworn,damaged,ormissingdecals.
30