Toro Workman 07390 - Page 63

3.Onthedisabledmachine,connectthe2jumper
hosestothehosesthatweredisconnected
(Figure84).
4.Captheunusedttings.
g002429
Figure84
1.Disconnectedhoses2.Jumperhoses
5.Ontheothermachine,connectthe2hosesto
thecouplerstillinthecouplerbracket(connect
thetophosetothetopcouplerandthebottom
hosetothebottomcoupler)(Figure85).
6.Captheunusedttings.
g019543
Figure85
1.Jumperhoses
7.Keepallbystandersawayfromthemachines.
8.Startthesecondmachineandmovetheliftlever
totheraiseposition,whichraisesthedisabled
cargobed.
9.Movethehydraulic-liftlevertotheNEUTRAL
position,andengagethelift-leverlock.
10.Installthebedsupportontotheextendedlift
cylinder;refertoUsingtheBedSupport(page
35).
Note:Withboththemachineturnedoff,move
theliftleverbackandforthtoremovethesystem
pressureandeasethedisconnectionofthe
quickcouplers.
11.Aftercompletingtheoperation,removethe
jumperhosesandconnectthehydraulichoses
tobothmachines.
Important:Checkthehydraulicuid
levels,inbothmachines,beforeresuming
operation.
63