Engine Removal (continued)
g420404
Figure 15
16. Remove the deck belt. Refer to Deck Belt Removal ( page 5– 7 ) .
17. Remove the hydrostatic drive belt. Refer to Hydrostatic Drive Belt Removal
( page 7– 10 ) .
18. Remove the clutch. Refer to Clutch Removal ( page 4– 17 ) .
19. Using a 9/16 inch socket, remove the 4 (3/8 inch) bolts securing the engine
to the chassis.
g420390
Figure 16
20. Using a proper lifting device, lift the engine up and out from the machine.
Engine Installation
1. Using a proper lifting device, lower the engine down and into place.
Engine: Service and Repairs
Page 4–10 2000 Series Z MASTER®Service Manual
3460-328 Rev A
To Next Page
Loading...
