6F8C1048 129
F
M: Manual mode
ML: MV low value
MH: MV high value
MS: Maintenance or simulation under way
MUE: MVU error
MV: Manipulated value
MVE: MV readback error
MVF: MV fixed fixed value mode
MVH: MV high alarm
MVL: MV low alarm
MVR: MV remote mode
NDL: Negative deviation limit
NDV: Negative deviation alarm
PDL: Positive deviation limit
PDV: Positive deviation alarm
PH: High alarm limit
PHH: High-high alarm limit
PL: Low alarm limit
PLL: Low-low alarm limit Polynomial number
PSH: Preset attained
PPSH: Pre-preset attained
PNT: Point number
PV: Process variable
PVA: Data input address, process variable address)
PVB: Alarm dead ban
PVC: Process variable count data
PVD: PV rate of change alarm
PVH: PV high alarm
PHVV: PV high-high alarm
PVI: PV inactive (sensor alarm)
PVIH: PV high sensor alarm
PVIL: PV low sensor alarm
PVL: PV low alarm
PVLL: PV low-low alarm
M
N
P
To Next Page
Loading...
