130 model 3000 ADMAP-5M AN712 Module User’s Manual
Appendix F Abbreviations
F
RH: Engineering unit high
RL: Engineering unit low
RM: Remote manual mode
RT: Ratio
RUN: Sequence running (DPCS)
SAD: Scan transmission terminal unit number
SAUT: Sequence semi-automatic mode confirmed (DPCS)
SCN: Scan off
SCNF: Sequence confirmed (DPCS)
SEQ: Sequence mode
SET: Digital set value (word/double word/real)
SLT: Slot number
SPR: PV check suppress
SQR: Square root request
SRD: Serial input/output readback address
STOP: Sequence stop (DPCS)
SV: Set point value
TD: Rate time (minute)
TEST: Test under way (DPCS)
TI: Integral time (minute)
TR: MV tracking
TYP: Data type (word (1)/double word (2)/real (3))
UNT: Unit number
VPI: Valve position input
V0: Threshold Speed
R
S
T
U
V
To Next Page
Loading...
