Toshiba BA400 Series - Page 112

107
<< CENTRO >>
Item
Description
Initial value
ACK/BUSY
ACK/BUSY timing
Rising edge
INPUT PRIME
Whether to reset the printer when the
INIT signal is ON
ON
PLUG & PLAY
Plug and play
OFF
<< LAN/WLAN >>
Item
Description
Initial value
LAN/WLAN
Selection of LAN type
AUTO
SNMP
SNMP
ON
IP ADDRESS
Printer IP address
Not cleared.
* Default is “192.168.10.20”.
SUBNET MASK
Subnet mask
Not cleared.
* Default is “255.255.255.0”.
GATEWAY ADDRESS
Gateway IP address
Not cleared.
* Default is “0.0.0.0”.
SOCKET PORT
Whether to enable socket communication
Not cleared.
* Default is ON.
Socket port number
Not cleared.
* Default is “9100”.
DHCP
DHCP
ON
DHCP CLIENT ID
DHCP ID
Not cleared.
* Default is ”not setting”.
DHCP HOST NAME
DHCP host name
Not cleared.
* Default is ”not setting”.
BAND SELECT
WLAN Frequency Setting
DUAL BAND
CONNECTION MODE
WLAN: Communication mode
INFRASTRUCTURE
ESS ID
WLAN: ESS ID
TOSHIBATEC
ENCRYPTION
WLAN: Encryption
OFF
WPA MODE
WLAN: WPA
OFF
AUTHENTICATION
WLAN: Authentication method
OPEN
802.1X SUPPLICANT
WLAN: Authentication method
OFF
DEFAULT KEY
WLAN: Encryption key
1
AP MODE CHANNEL
WLAN：AP Mode channel
1
LPR
Whether to enable LPR
ON
<< Bluetooth >>
Item
Description
Initial value
BLUETOOTH
Bluetooth Setting
ON
FACTORY TEST
Settings to distinguish device nicknames
OFF
DEVICE NICKNAME
Bluetooth Device Nickname
TOSHIBA TEC BT
BD ADDRESS
Bluetooth Device address
Not cleared.
* Module specific
INQUIRY
Inquiry setting
EVERY
SCAN INTERVAL
Scan Interval setting
2048