Toshiba BA400 Series - Page 113

108
SCAN WINDOW
Scan Window setting
36
SECURITY
Security Level setting
SSP
AUTO CONNECT
Auto Re-connection setting
OFF
SSP AUTH
SSP Authentication
JUST WORKS
NUMERIC CONP
Numeric comparison setting
NO IN/OUT
<< RFID >>
Item
Description
Initial value
MODULE TYPE
RFID module type
NONE
TAG TYPE
RFID tag type
NONE
RF CHANNEL
RFID channel setting
AUTO
RETRY POSITION
RFID adjustment for retry
+00mm
RETRY LABELS
Max. number of RFID issue retries
3 labels
READ RETRY
Max. number of RFID read retries
5 times
RFID read retry timeout
4.0 sec.
WRITE RETRY
Max. number of RFID write retries
5 times
RFID write retry timeout
2.0 sec.
POWER LEVEL
Radio intensity level
18
Q VALUE
RFID module Q value
0
AGC THRESHOLD
RFID AGC threshold setting
0
WRITE AGC
AGC threshold for data write
0
RETRY MIN AGC
AGC threshold lower limit for retry
0
TAG CHECK
RFID error tag detection
Not cleared
MULTI WRITE
Hibiki tag multi-word write
OFF
CALIB. MODE
RFID calibration mode
OFF
ENCODE. POSITION
Distance to the optimum read/write
position obtained through RFID
calibration
+000.0mm
SUCCEEDED TAGS
Number of times data write succeeded
Not cleared.
VOID PRINT TAGS
Number of times data write failed
Not cleared.
<< RTC >>
Item
Description
Initial value
BATTERY CHECK
Battery check
Not cleared.
* Default is OFF.
RENEWAL
Time update timing
Not cleared.
* Default is “Per batch”.
 Settings not printed on the maintenance counter/parameter setting data printout
User system mode:
<5>SHOW ISSUE COND.
Item
Initial value
Sensor
(Note)
TRANSMISSIVE
Mode
BATCH
Print Speed
203 dpi: 4 ips
300 dpi: 4 ips