Toshiba BA400 Series - Page 115

110
↓[PAUSE]
4．Print Mode Setting
PRINT MODE w/RIBBON
▲
With RIBBON
Without RIBBON
▼
[F]/[R]Select [P]Set
Selected by [FEED]、[RESTART]
↓[PAUSE]
5．Calibrate Setting
CALIBRATE OFF
▲
OFF
LABEL/GAP
BLACK MARK
▼
[F]/[R]Select [P]Set
Selected by [FEED]、[RESTART]
6．-1 Calibrate setting select except “OFF “
6．-1-1
Finish setting
INITIAL CONFIGURATION
FINISH？
[PAUSE] Finish
[F]+[R]Prev [P]Set
↓[PAUSE]
To 7．Saved the Setting
6．-2 Calibrate setting select “OFF “
6．-2-1
Paper detect setting
PAPER DETECT FEED/GAP
▲
CONTINUOUS
LABEL/GAP
BLACK MARK
▼
[F]/[R]Select [P]Set
Selected by [FEED]、[RESTART]
↓[PAUSE]
6．-2-2
Paper length Setting
PAPER LENGTH 76mm
mm
(10 – 1500mm)
[F]/[R]Select [P]Set
Set the paper length with [FEED]
and [RESTART].
↓[PAUSE]
6．-2-3
Setting complete
INITIAL CONFIGURATION
FINISH？
[PAUSE] Finish
[F]+[R]Prev [P]Set
↓[PAUSE]
To 7．Saved the Setting
7．Saved the Setting
SAVING SETTING...
↓
76