Toshiba BA400 Series - Page 73

68
HEAD [RANK]1 300DPI
| | Installed head resolution (203DPI / 300DPI)
|
| Thermal head resistance rank (0 / 1)
LAN MAC 11-22-33-44-55-66
| Wired LAN: MAC address
EXP.I/O NG
| | OK: Data normal
| NG: Data error or loopback jig not installed
|
| Expansion I/O
EX.232C NG
| | OK: Data normal
| NG: Data error or loopback jig not installed
|
| Internal serial interface
SIO NG(0111) NG
| | | | DIN OK: Data normal
| | | NG: Data error or loopback jig not installed
| | |
| | | Bit configuration (x3x2x1x0)
| | x0: 1 fixed
| | x1: 1 fixed
| | x2: 1 fixed
| | x3: Option board presence
| | 0: SIO board not connected
| | 1: SIO board connection
| |
| | OK: Data normal
| NG: Data error or loopback jig not installed
|
| External serial interface
CENTRO V1.0A
| | Centro program version
| * If the Centro board is not installed, “--” is displayed.
|
| Centronics
BLUETOOTH OK sppi_v2.12
| | | Bluetooth module firmware version
| | * If the version cannot be obtained from the Bluetooth module, it will be “--”.
| |
| | OK: Normal
| NG: Abnormal
| ― : Not installed
|
| Bluetooth