1
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO555/655/755/855
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
1 - 3
Power requirements AC 110 V / 16 A (50/60 Hz)
AC 115 V / 16 A (50/60 Hz)
AC 127 V / 16 A (50/60 Hz)
AC 220 V / 9 A (50/60 Hz)
AC 220-240 V / 9 A (50/60 Hz)
* The acceptable value of each voltage is ±10%.
Power consumption 2.0 kW or less
* 1.5 kW or less: TWD version of e-STUDIO655.
* The electric power is supplied to the Finisher, Inserter, Hole punch
unit and LCF through the equipment
Dimensions of the equipment W 698 x D 789 x H 1176 (mm)
Weight Approx. 202 kg (445 lb.) (equipment only)
789 mm
698 mm
1176 mm
To Next Page
Loading...
