Toshiba e-studio555 - Original Feed Motor (MR1); Original Feed Motor Bracket

e-STUDIO555/655/755/855 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 38
15.5.24 Original feed motor (MR1)
15.5.25 Original feed motor bracket
(1) Take off the RADF rear cover.
 P.15-16 "15.5.3 RADF rear cover"
(2) Loosen 1 screw.
Fig. 15-84
(3) Disconnect 1 connector, remove 2 screws
and take off the original feed motor.
Fig. 15-85
(1) Take off the RADF rear cover.
 P.15-16 "15.5.3 RADF rear cover"
(2) Loosen 1 screw.
Fig. 15-86
Connector