GX9 ASD Installation and Operation Manual 183
Preset Speed 11 Run Time
Program Frequency Preset Speed Time Settings
In conjunction with the setting of F580, this parameter is used to set the run-
time of Preset Speed 11 when used as part of a Pattern Run.
Direct Access Number — F595
Parameter Type — Numerical
Factory Default — 5
Changeable During Run — Yes
Minimum — 1
Maximum — 8000
Units — User Select (F580)
Preset Speed 12 Run Time
Program Frequency Preset Speed Time Settings
In conjunction with the setting of F581, this parameter is used to set the run-
time of Preset Speed 12 when used as part of a Pattern Run.
Direct Access Number — F596
Parameter Type — Numerical
Factory Default — 5
Changeable During Run — Yes
Minimum — 1
Maximum — 8000
Units — User Select (F581)
Preset Speed 13 Run Time
Program Frequency Preset Speed Time Settings
In conjunction with the setting of F582, this parameter is used to set the run-
time of Preset Speed 13 when used as part of a Pattern Run.
Direct Access Number — F597
Parameter Type — Numerical
Factory Default — 5
Changeable During Run — Yes
Minimum — 1
Maximum — 8000
Units — User Select (F582)
Preset Speed 14 Run Time
Program Frequency Preset Speed Time Settings
In conjunction with the setting of F583, this parameter is used to set the run-
time of Preset Speed 14 when used as part of a Pattern Run.
Direct Access Number — F598
Parameter Type — Numerical
Factory Default — 5
Changeable During Run — Yes
Minimum — 1
Maximum — 8000
Units — User Select (F583)
Preset Speed 15 Run Time
Program Frequency Preset Speed Time Settings
In conjunction with the setting of F584, this parameter is used to set the run-
time of Preset Speed 15 when used as part of a Pattern Run.
Direct Access Number — F599
Parameter Type — Numerical
Factory Default — 5
Changeable During Run — Yes
Minimum — 1
Maximum — 8000
Units — User Select (F584)
F595 F599
To Next Page
Loading...
