3.8 Printer Test 3 Tests and Diagnostics
Satellite Pro M10 Series Maintenance Manual (960-431) 3-25
Subtest 02 Function
This subtest is for IBM compatible printers, and tests the following functions:
Normal print
Double-width print
Compressed print
Emphasized print
Double-strike print
All characters print
This subtest prints the various print types shown below:
Subtest 03 Wrap around
NOTE: To execute this subtest, a printer wraparound connector must be
connected to the printer port in the Port Replicator. The printer
wraparound connector (34M741986G01) wiring diagram is described in
Appendix F.
This subtest checks the output and bi-directional modes of the data control
and status lines through the parallel port wraparound connector.
To Next Page
Loading...
