4.6 CPU 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-25
4.6 CPU
Removing the CPU
To remove the CPU, follow the steps below and refer to Figures 4-13 and 4-16.
1. Remove one M2.5×6 black flat-head screw and two M2.5×4 black flat-head screw
securing the CPU/MDC slot cover, if necessary.
2. Remove two M2×4 black screws securing the metal brace to remove it.
M2×4 black screws
Metal brace
Figure 4-13 Removing the metal brace
To Next Page
Loading...
