4.1 General 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-11
Removing an Optional SD Card
To remove an SD card (option), follow the steps below and refer to Figure 4-3.
CAUTION: Before you remove an SD card, refer to the card's documentation and to
your operating system documentation for proper procedures and precautions.
1. Turn the computer right side up.
2. Push the SD card in and release it to pop the card out slightly.
3. Grasp the SD card and pull it out.
SD Card
Figure 4-3 Removing an SD card
Installing an Optional SD Card
To install an SD card (option), follow the steps below and refer to Figure 4-3.
1. Insert an SD card.
2. Push it carefully to ensure a firm connection.
To Next Page
Loading...
