4.7 Keyboard 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-33
Installing the Keyboard
To install the keyboard, follow the steps below and refer to Figures 4-18 to 4-21.
1. Lay the keyboard on the palm rest upside down.
2. Connect the keyboard cable to PJ123 on the system board.
3. Seat the metal plate and secure it with one M2.5×16 black screw.
4. Turn the keyboard right side up and seat it.
5. Secure the keyboard with two M2.5×3 black flat-head screws.
6. Seat the keyboard brace and press to secure twelve latches.
To Next Page
Loading...
