4 Replacement Procedures 4.5 Modem Daughter Card
4-22 Satellite Pro M10 Series Maintenance Manual (960-431)
4.5 Modem Daughter Card
Removing the Modem Daughter Card
To remove the modem daughter card (MDC), follow the steps below and refer to Figures 4-
11 and 4-12.
1. Remove one M2.5×6 black flat-head screw and two M2.5×4 black flat-head
screws securing the CPU/MDC slot cover.
2. Remove the CPU/MDC slot cover.
M2.5×4 black flat-head screws
M2.5×6 black flat-head screw
CPU/MDC slot cover
Figure 4-11 Removing the CPU/MDC slot cover
To Next Page
Loading...
