4 Replacement Procedures 4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43)
4-136 Satellite Pro M10 Series Maintenance Manual (960-431)
4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43)
Removing the TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43)
To remove the TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43), follow the steps
below and refer to Figures 4-105 to 4-113.
1. Turn the LCD module upside down.
2. Remove the protective cover-S, protective cover-G, fixing tape, and HV cable fixing
tape. Be careful not to damage the TCP or ICs. (Dispose of the protective covers and
tapes you have removed.)
Protective cover-S
Protective cover-G
Fixing tape
HV cable fixing tape
Figure 4-105 Removing the covers and tapes
To Next Page
Loading...
