4.21 USB Board 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-63
4.21 USB Board
Removing the USB Board
To remove the USB board, follow the steps below and refer to Figure 4-43.
1. Remove one M2×4 screw securing the USB board.
2. Remove the USB board.
M2×4 screw
USB board
Figure 4-43 Removing the USB board
Installing the USB Board
To install the USB board, follow the steps below and refer to Figure 4-43.
1. Seat the USB board and secure it with one M2×4 screw.
To Next Page
Loading...
