4.25 Antenna Coaxial Cables 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-77
Installing the Antenna Coaxial Cables
To install the antenna coaxial cables, follow the steps below and refer to Figures 4-51 to 4-53.
1. Seat the antennas and route the antenna coaxial cables.
2. Secure the antenna coaxial cable with four strips of tape.
3. Thread the antenna coaxial cable through the hinge.
4. Close the display panel.
5. Seat the plastic cover and secure it with two M2.5×4 black flat-head screws.
6. Route the antenna coaxial cables through their groove.
7. Secure the antenna coaxial cable with the insulator and a strip of tape.
8. Route the antenna coaxial cables under the insulator and through their hooks.
To Next Page
Loading...
