4.17 Cooling Fan 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-55
4.17 Cooling Fan
Removing the Cooling Fan
To remove the cooling fan, follow the steps below and refer to Figures 4-37.
CAUTION: The cooling fan can become very hot during operation. Wait for the fan to
cool before removing it. Do not touch the fan rotor or fan blades or apply impact to the
cooling fan module.
1. Remove one strip of tape securing the cooling fan cable.
2. Remove the cooling fan cable from PJ8770 on the system board.
3. Remove two M2.5×6 black flat-head screws securing the cooling fan.
4. Remove the cooling fan.
M2.5×6 black flat-head screws
Cooling fan
PJ8770
Cooling fan cable
Figure 4-37 Removing the cooling fan
To Next Page
Loading...
