4 Replacement Procedures 4.26 LCD/FL Cable
4-80 Satellite Pro M10 Series Maintenance Manual (960-431)
6. Close the display panel.
7. Remove the LCD/FL cable.
LCD/FL cable
Figure 4-56 Removing the LCD/FL cable
Installing the LCD/FL Cable
To install the LCD/FL cable, follow the steps below and refer to Figures 4-54 to 4-56.
1. Route the LCD/FL cable.
2. Seat the metal plate and secure it with one M2.5×6 tapping screw.
3. Set the plastic brace and the metal plate.
4. Seat the plastic cover and secure it with two M2.5×4 black flat-head screws.
To Next Page
Loading...
