4 Replacement Procedures 4.25 Antenna Coaxial Cables
4-74 Satellite Pro M10 Series Maintenance Manual (960-431)
4.25 Antenna Coaxial Cables
Removing the Antenna Coaxial Cables
To remove the antenna coaxial cables, follow the steps below and refer to Figures 4-51 to 4-
53.
NOTE: When you open or close the top cover, hold it by the sides close to the hinges to
prevent damage.
1. Turn over the insulator securing the antenna coaxial cables.
2. Free the antenna coaxial cables from their hooks.
Insulator
Antenna coaxial cables
Figure 4-51 Freeing the antenna coaxial cables
To Next Page
Loading...
