4 Replacement Procedures 4.26 LCD/FL Cable
4-78 Satellite Pro M10 Series Maintenance Manual (960-431)
4.26 LCD/FL Cable
Removing the LCD/FL Cable
To remove the LCD/FL cable and antenna coaxial cable, follow the steps below and refer to
Figures 4-54 to 4-56.
NOTE: When you open or close the top cover, hold it by the sides close to the hinges to
prevent damage.
1. Remove two M2.5×4 black flat-head screws securing the plastic cover.
2. Remove the plastic cover.
M2.5×4 black flat-head screws
plastic cover
Figure 4-54 Removing the plastic cover
To Next Page
Loading...
