4 Replacement Procedures 4.1 General
4-8 Satellite Pro M10 Series Maintenance Manual (960-431)
Removing the Battery Pack
To remove the battery pack, follow the steps below and refer to Figure 4-1.
CAUTION: When handling battery packs, be careful not to short circuit the terminals.
Also do not drop, hit or otherwise apply impact; do not scratch or break the casing and
do not twist or bend the battery pack.
1. Turn the computer upside down.
2. Slide the battery latch toward the front to release it, then rotate the battery pack
from the right and lift it out.
Battery latch
Battery pack
Figure 4-1 Removing the battery
NOTE: For environmental reasons, do not throw away a spent battery pack. Please return
the spent battery packs to TOSHIBA.
To Next Page
Loading...
