Toshiba Satellite Pro M10 Series - Figure 4-126 Applying the Tapes

4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43) 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-153
18. Apply the fixing tape and the HV cable fixing tape.
Secure the cable with tape.
Be sure the cable lies flat.
Apply the fixing tape around
the center of the module.
0 to 1 mm
Be sure not to let the tape protrude
beyond the frame side.
Fixing tape
HV cable fixing tape
0 to 0.5mm
Be sure not to let the tape
lie on the screen of the LCD.
Align the end of the tape with the edge of the module.
Be sure not to let the tape protrude beyond
the edge of the module.
Figure 4-126 Applying the tapes