4.3 HDD 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-15
4.3 HDD
CAUTION: When handling the HDD, do not press the top surface as shown by the arrow.
Hold it by the sides.
Removing the HDD
To remove the HDD, follow the steps below and refer to Figures 4-6 to 4-8.
1. Turn the computer upside down.
2. Remove two M2.5×12 black flat-head screws securing the HDD cover.
3. Lift off the HDD cover.
M2.5×12 black flat-head screws
HDD cover
Figure 4-6 Removing the HDD cover
To Next Page
Loading...
