Toshiba Satellite Pro M10 Series - Palm Rest; Removing the Palm Rest

4.10 Palm Rest 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-39
4.10 Palm Rest
Removing the Palm Rest
To remove the palm rest, follow the steps below and refer to Figures 4-25 and 4-26.
1. Turn the computer upside down.
2. Remove seven M2.5×12 black screws.
M2.5×12 black screws
M2.5×12 black screws
Figure 4-25 Removing the screws from the bottom of the computer