4 Replacement Procedures 4.10 Palm Rest
4-40 Satellite Pro M10 Series Maintenance Manual (960-431)
3. Turn the computer right side up and open the display panel.
4. Disconnect the pad cable from PJ2003 on the system board.
5. Remove two M2.5×5 black flat-head screws securing the palm rest.
6. Release two latches to remove the palm rest.
M2.5×5 black flat-head screws
Pad cable
PJ2003
Palm rest
Figure 4-26 Removing the palm rest
To Next Page
Loading...
